AAI ORIGINAL English Verison N1201SA N1201SA+ 34.375MHz-2.7GHz UV RF Vector Impedance ANT SWR Antenna Analyzer Meter Tester
214
Direct purchase from the factory 
Checkout garanti an sekirite
Kado gratis
Règleman livrezon
Règleman retouKado gratis
Byenveni nan Roymall, sit entènèt pwofesyonèl ou pou achte kado depatman magazen prim. Nou valè ak apresye sipò ou, epi nou vle eksprime rekonesans nou an nan ajoute yon touche eksitasyon siplemantè nan acha ou yo. Lè w ap fè makèt avèk nou, ou pa sèlman jwenn pwodwi ki gen bon jan kalite ki amelyore fòm ou, men ou pral resevwa tou yon kado gratis eksklizif ak chak lòd ou fè. Ou pare pou eksplore koleksyon nou an epi jwenn kado pafè ou yo? Parcou seleksyon nou an nan atik depatman magazen prim, fè lòd ou, epi tann eksitasyon kado gratis ou a ki rive ansanm ak acha ou.Règleman livrezon
Nou pral travay di pou livre atik ba ou apre resevwa lòd ou yo epi asire yo rive an sekirite. Detay livrezon yo pral bay nan imèl konfimasyon ou.Nan pifò ka, lòd yo trete nan 2 jou.Nan sikonstans espesyal, li pral retade jan sa a: Lè ou fè yon lòd samdi, dimanch oswa jou ferye, li pral retade pou 2 jou..Nòmalman, li bezwen 5-7 jou ouvrab (lendi a vandredi) san yo pa afekte pa reta vòl oswa lòt faktè anviwònman..Paske sèvis livrezon nou an se mondyal, tan livrezon yo pral depann de kote ou ye kidonk li ka bezwen kèk tan epi tanpri rete pasyan si ou nan distri oswa peyi aleka.1. Règleman Retounen & Echanj
Nou sèlman aksepte atik achte sou roymall.com. Si ou achte nan distribitè lokal nou yo oswa lòt revandè, ou pa ka retounen yo sou bò nou. Atik lavant final oswa kado gratis yo pa akseptab pou retounen. Pou kalifye pou yon retounen, atik ou a dwe itilize epi nan menm kondisyon ke ou te resevwa li. Li dwe tou nan anbalaj orijinal la.Apre resevwa enstriksyon retounen nan men nou, tanpri anbalaje atik retounen ou yo epi depoze pake ou a nan biwo lapòs lokal la oswa yon lòt kurye.Nou pral trete atik retounen oswa echanj ou a nan 3-5 jou ouvrab apre nou resevwa li. Rembousman an pral trete ak kredite otomatikman nan metòd orijinal ou a nan peman.Pa gen retounen oswa echanj ka aksepte si pwodwi a te pwodui koutim, ki gen ladan gwosè koutim, koulè koutim, oswa enprime koutim.Bezwen plis èd, tanpri kontakte nou. service@roymall.com oswa Whatsapp: +8619359849471
2.Règleman Rembousman
Ou pral jwenn yon rembousman konplè oswa 100% kredi magazin apre nou resevwa pake retounen an epi verifye li. Rembousman an pral trete ak kredite otomatikman nan metòd orijinal ou a nan peman. Tanpri sonje ke frè livrezon ak nenpòt dwa oswa frè yo pa rembousab. Frè livrezon siplemantè yo pa rembousab yon fwa pake a te anbake. Ou responsab pou peye frè sa yo epi nou pa kapab egzante oswa rembouse yo, menm si lòd la retounen tounen vin jwenn nou.Yon fwa nou resevwa ak konfime atik retounen ou a, nou pral voye yon imèl ba ou pou fè ou konnen ke nou te resevwa atik retounen ou a. Nou pral tou fè ou konnen apwobasyon oswa rejè rembousman ou.Si ou gen nenpòt pwoblèm konsènan pwosesis rembousman an, tanpri kontakte nou. service@roymall.com oswa Whatsapp: +8619359849471
Description:
- This instrument has four interfaces: single point measurement, scanning, system information, correction and calibration
The default boot into single-point measurement interface.
Note: For the convenience of the user, each time calibration correction options will automatically change to the user calibration. Meanwhile, in order to ensure the integrity of the calibration, the calibration process, the automatic shutdown function fails, the consistent boot.
Startup and shutdown:
Hold down the CTRL key off press the power switch button.
The boot state, long press (2S above) the switch button, after the release, the instrument will shut down
The boot state, long press (2S above) the switch button, after the release, the instrument will shut down
Recommend the use:
1, in order to ensure the accuracy of measurement and calibration, preheat the instrument at least 15 minutes.
2, try to use good quality RF cable and connectors.
3, calibrated cable marked to the next may not need to calibrate and direct use.
4, test cable process affect the measurement accuracy, it is recommended that, where possible, do not choose too long test cable.
5, measurement and calibration before, make sure you are not in a strong wireless signal, so as to avoid interference caused by inaccurate measurements.
6, if the impedance measurements themselves do not understand, you can refer to a vector network analyzer instructions and tutorials. This instrument is equivalent to a single-port vector network analysis
Specification:
working currency: 140MHz~2700MHz
stepped frequency: 1kHz
Display: 2.4inch TFT
resolution: 320*240(QVGA)
battery: 2000mAH(7.4Wh)
power consumption: <1.5W
charge current: 400mA
charge port: USB
Auto power off can be set 5-60minutes
Measured parameters:
resistence reactance standing wave s11
resolution ratio: 4 number
frequency accuracy: about 5ppm
Connector: SMA-K
Measurement range:
impedance: 0.1~1000
standing wave: 1.000~65
s11(dB): 0dB~-60dB
Working temperature: 0~40 degree
Package included:
1 x Original N1201SA Antenna Analyzer Meter
1 x English User Manual
- This instrument has four interfaces: single point measurement, scanning, system information, correction and calibration
The default boot into single-point measurement interface.
Note: For the convenience of the user, each time calibration correction options will automatically change to the user calibration. Meanwhile, in order to ensure the integrity of the calibration, the calibration process, the automatic shutdown function fails, the consistent boot.
Startup and shutdown:
Hold down the CTRL key off press the power switch button.
The boot state, long press (2S above) the switch button, after the release, the instrument will shut down
The boot state, long press (2S above) the switch button, after the release, the instrument will shut down
Recommend the use:
1, in order to ensure the accuracy of measurement and calibration, preheat the instrument at least 15 minutes.
2, try to use good quality RF cable and connectors.
3, calibrated cable marked to the next may not need to calibrate and direct use.
4, test cable process affect the measurement accuracy, it is recommended that, where possible, do not choose too long test cable.
5, measurement and calibration before, make sure you are not in a strong wireless signal, so as to avoid interference caused by inaccurate measurements.
6, if the impedance measurements themselves do not understand, you can refer to a vector network analyzer instructions and tutorials. This instrument is equivalent to a single-port vector network analysis
Specification:
working currency: 140MHz~2700MHz
stepped frequency: 1kHz
Display: 2.4inch TFT
resolution: 320*240(QVGA)
battery: 2000mAH(7.4Wh)
power consumption: <1.5W
charge current: 400mA
charge port: USB
Auto power off can be set 5-60minutes
Measured parameters:
resistence reactance standing wave s11
resolution ratio: 4 number
frequency accuracy: about 5ppm
Connector: SMA-K
Measurement range:
impedance: 0.1~1000
standing wave: 1.000~65
s11(dB): 0dB~-60dB
Working temperature: 0~40 degree
Package included:
1 x Original N1201SA Antenna Analyzer Meter
1 x English User Manual
Products related to this item
Loading related products...
❮
❯
Videos for similar product
Loading product videos...
❮
❯
Tools, Industrial & Scientific Ranking
![[Limited big discount] DG852 Pro Series Function Arbitrary Waveform Generator 50MHz 2CH 625MSa/s High Accuracy Portable Design with 7 inch Touch Screen Low Jitter Rich Modulation for Communication Motor Control](https://static.roymall.com/d/file/mall/titlepic/233/xfhkrh2lnce.jpg?x-oss-process=image/resize,w_237/quality,Q_80/format,webp)
- This instrument has four interfaces: single point measurement, scanning, system information, correction and calibration
The default boot into single-point measurement interface.
Note: For the convenience of the user, each time calibration correction options will automatically change to the user calibration. Meanwhile, in order to ensure the integrity of the calibration, the calibration process, the automatic shutdown function fails, the consistent boot.
Startup and shutdown:
Hold down the CTRL key off press the power switch button.
The boot state, long press (2S above) the switch button, after the release, the instrument will shut down
The boot state, long press (2S above) the switch button, after the release, the instrument will shut down
Recommend the use:
1, in order to ensure the accuracy of measurement and calibration, preheat the instrument at least 15 minutes.
2, try to use good quality RF cable and connectors.
3, calibrated cable marked to the next may not need to calibrate and direct use.
4, test cable process affect the measurement accuracy, it is recommended that, where possible, do not choose too long test cable.
5, measurement and calibration before, make sure you are not in a strong wireless signal, so as to avoid interference caused by inaccurate measurements.
6, if the impedance measurements themselves do not understand, you can refer to a vector network analyzer instructions and tutorials. This instrument is equivalent to a single-port vector network analysis
Specification:
working currency: 140MHz~2700MHz
stepped frequency: 1kHz
Display: 2.4inch TFT
resolution: 320*240(QVGA)
battery: 2000mAH(7.4Wh)
power consumption: <1.5W
charge current: 400mA
charge port: USB
Auto power off can be set 5-60minutes
Measured parameters:
resistence reactance standing wave s11
resolution ratio: 4 number
frequency accuracy: about 5ppm
Connector: SMA-K
Measurement range:
impedance: 0.1~1000
standing wave: 1.000~65
s11(dB): 0dB~-60dB
Working temperature: 0~40 degree
Package included:
1 x Original N1201SA Antenna Analyzer Meter
1 x English User Manual
