DC7V-35V to DC1.25V-30V LED Driver Charging Constant Current Voltage Step Down Buck Power Supply Module
265
Checkout garanti an sekirite

Atik retounen yo pral aksepte nan 40 jou depi dat resepsyon machandiz yo. Atik pèsonalize pa ka retounen oswa echanje. Atik achte ak yon kat kado elektwonik ka echanje sèlman; rembousman yo pa aplikab.
Kado gratis
Byenveni nan Roymall, sit entènèt pwofesyonèl ou pou achte kado depatman magazen prim. Nou valè ak apresye sipò ou, epi nou vle eksprime rekonesans nou an nan ajoute yon touche eksitasyon siplemantè nan acha ou yo. Lè w ap fè makèt avèk nou, ou pa sèlman jwenn pwodwi ki gen bon jan kalite ki amelyore fòm ou, men ou pral resevwa tou yon kado gratis eksklizif ak chak lòd ou fè. Ou pare pou eksplore koleksyon nou an epi jwenn kado pafè ou yo? Parcou seleksyon nou an nan atik depatman magazen prim, fè lòd ou, epi tann eksitasyon kado gratis ou a ki rive ansanm ak acha ou.Règleman livrezon
Nou pral travay di pou livre atik ba ou apre resevwa lòd ou yo epi asire yo rive an sekirite. Detay livrezon yo pral bay nan imèl konfimasyon ou.Nan pifò ka, lòd yo trete nan 2 jou.Nan sikonstans espesyal, li pral retade jan sa a: Lè ou fè yon lòd samdi, dimanch oswa jou ferye, li pral retade pou 2 jou..Nòmalman, li bezwen 5-7 jou ouvrab (lendi a vandredi) san yo pa afekte pa reta vòl oswa lòt faktè anviwònman..Paske sèvis livrezon nou an se mondyal, tan livrezon yo pral depann de kote ou ye kidonk li ka bezwen kèk tan epi tanpri rete pasyan si ou nan distri oswa peyi aleka.1. Règleman Retounen & Echanj
Nou sèlman aksepte atik achte sou roymall.com. Si ou achte nan distribitè lokal nou yo oswa lòt revandè, ou pa ka retounen yo sou bò nou. Atik lavant final oswa kado gratis yo pa akseptab pou retounen. Pou kalifye pou yon retounen, atik ou a dwe itilize epi nan menm kondisyon ke ou te resevwa li. Li dwe tou nan anbalaj orijinal la.Apre resevwa enstriksyon retounen nan men nou, tanpri anbalaje atik retounen ou yo epi depoze pake ou a nan biwo lapòs lokal la oswa yon lòt kurye.Nou pral trete atik retounen oswa echanj ou a nan 3-5 jou ouvrab apre nou resevwa li. Rembousman an pral trete ak kredite otomatikman nan metòd orijinal ou a nan peman.Pa gen retounen oswa echanj ka aksepte si pwodwi a te pwodui koutim, ki gen ladan gwosè koutim, koulè koutim, oswa enprime koutim.Bezwen plis èd, tanpri kontakte nou. service@roymall.com oswa Whatsapp: +8619359849471
2.Règleman Rembousman
Ou pral jwenn yon rembousman konplè oswa 100% kredi magazin apre nou resevwa pake retounen an epi verifye li. Rembousman an pral trete ak kredite otomatikman nan metòd orijinal ou a nan peman. Tanpri sonje ke frè livrezon ak nenpòt dwa oswa frè yo pa rembousab. Frè livrezon siplemantè yo pa rembousab yon fwa pake a te anbake. Ou responsab pou peye frè sa yo epi nou pa kapab egzante oswa rembouse yo, menm si lòd la retounen tounen vin jwenn nou.Yon fwa nou resevwa ak konfime atik retounen ou a, nou pral voye yon imèl ba ou pou fè ou konnen ke nou te resevwa atik retounen ou a. Nou pral tou fè ou konnen apwobasyon oswa rejè rembousman ou.Si ou gen nenpòt pwoblèm konsènan pwosesis rembousman an, tanpri kontakte nou. service@roymall.com oswa Whatsapp: +8619359849471
Feature:
This module uses the LM2596 chip, high efficiency (up to 92%), low heat, can be very easily used to above 3A current, in conjunction with the original TI op amp control output current, so the overall output is very stable.
This module uses the original Sanyo low ESR filter capacitor, you can make low ripple voltage to 50mV!
This module uses machine placement, reflow soldering.
This module is an adjustable buck module, the module can be adjusted from the blue adjustable resistor to change the output voltage. Input and output differential pressure is 2V, the minimum can be output 1.23V.
Module indicated IN - (negative input), IN + (positive input), OUT - (negative output), OUT + (positive output), please note must be correct connected, otherwise may cause damage to the module.
Description:
Nature of the module: Non-isolated step-down module
Rectification: Non-synchronous rectification
Input voltage: 7V - 35V
Output voltage: 1.25V - 30V
Output current: Adjustable, 3A (maximum)
Transfer efficiency: 92% (maximum)
Switching frequency: 150KHz
output ripple: 50mV (maximum) 20M Kbps
Load regulation: ±0.5%
Voltage regulation: ±2.5%
Operating temperature: -40°C to +85°C
Dimension: 48 x 23 x 14mm (L x W x H)
Battery charging method:
1. Make sure the battery float voltage and charging current, the module input voltage;
2. Adjustment constant potentiometer, the output voltage is adjusted to about 5V.
3. Use the multimeter (10A current) measuring the output short-circuit current, meanwhile adjust the constant current potentiometer make the output current reaches a predetermined charge current value;
4. Turn lamp current default is 0.1 times charging current (constant current value), if you need to adjust please adjust the turn lamp current potentiometer; (generally doesn't need adjustment)
5. Adjustment constant potentiometer allows the output voltage reaches the float voltage;
6. Connected to the battery and try to charge.
(1,2,3,4,5 steps are for the module input connected to the power supply, output-load battery is not connected.)
LED constant current driver using method:
1. Make sure that the drive LED operating current and maximum working voltage;
2. Adjustment constant potentiometer, output voltage adjusted to about 5V.
3. Use the multimeter (10A current) measuring the output short-circuit current, meanwhile adjusting the constant current potentiometer allows the output current reaches a predetermined LED working current;
4. Adjustment constant potentiometer allows the output voltage reaches the maximum operating voltage LED;
5. Connect LED, test machine.
(1,2,3,4 steps are module input connect to the power supply, output-load is not connected LED lights.)
Package included:
1 x Buck module
This module uses the LM2596 chip, high efficiency (up to 92%), low heat, can be very easily used to above 3A current, in conjunction with the original TI op amp control output current, so the overall output is very stable.
This module uses the original Sanyo low ESR filter capacitor, you can make low ripple voltage to 50mV!
This module uses machine placement, reflow soldering.
This module is an adjustable buck module, the module can be adjusted from the blue adjustable resistor to change the output voltage. Input and output differential pressure is 2V, the minimum can be output 1.23V.
Module indicated IN - (negative input), IN + (positive input), OUT - (negative output), OUT + (positive output), please note must be correct connected, otherwise may cause damage to the module.
Description:
Nature of the module: Non-isolated step-down module
Rectification: Non-synchronous rectification
Input voltage: 7V - 35V
Output voltage: 1.25V - 30V
Output current: Adjustable, 3A (maximum)
Transfer efficiency: 92% (maximum)
Switching frequency: 150KHz
output ripple: 50mV (maximum) 20M Kbps
Load regulation: ±0.5%
Voltage regulation: ±2.5%
Operating temperature: -40°C to +85°C
Dimension: 48 x 23 x 14mm (L x W x H)
Battery charging method:
1. Make sure the battery float voltage and charging current, the module input voltage;
2. Adjustment constant potentiometer, the output voltage is adjusted to about 5V.
3. Use the multimeter (10A current) measuring the output short-circuit current, meanwhile adjust the constant current potentiometer make the output current reaches a predetermined charge current value;
4. Turn lamp current default is 0.1 times charging current (constant current value), if you need to adjust please adjust the turn lamp current potentiometer; (generally doesn't need adjustment)
5. Adjustment constant potentiometer allows the output voltage reaches the float voltage;
6. Connected to the battery and try to charge.
(1,2,3,4,5 steps are for the module input connected to the power supply, output-load battery is not connected.)
LED constant current driver using method:
1. Make sure that the drive LED operating current and maximum working voltage;
2. Adjustment constant potentiometer, output voltage adjusted to about 5V.
3. Use the multimeter (10A current) measuring the output short-circuit current, meanwhile adjusting the constant current potentiometer allows the output current reaches a predetermined LED working current;
4. Adjustment constant potentiometer allows the output voltage reaches the maximum operating voltage LED;
5. Connect LED, test machine.
(1,2,3,4 steps are module input connect to the power supply, output-load is not connected LED lights.)
Package included:
1 x Buck module
Products related to this item
Loading related products...
❮
❯
Videos for similar product
Loading product videos...
❮
❯
Electronics Ranking

n
n

n
n

n
n

n
n

n
n

n
n
